Redline Communications Inc. RDL3000RM Manuel D’Utilisation
RDL-3000 FAMILY
RM PRODUCT MANUAL
70-00184-01-00
Proprietary Redline Communications © 2012
Page
6
of 14
March 1, 2012
3
Module Installation and Service
3.1 Installation Into a Final Product
The RDL-3000-RM must only be installed by trained professional technicians authorized
by Redline or its agents. The module must be installed only into an approved enclosure
(see Conditions of Use) and only at an approved manufacturing facility or service depot.
by Redline or its agents. The module must be installed only into an approved enclosure
(see Conditions of Use) and only at an approved manufacturing facility or service depot.
3.2 Module Servicing
The RDL-3000-RM is not intended to be field serviceable, and contains no field
serviceable or field replaceable parts. The module must be serviced only at an approved
manufacturing facility or service depot.
serviceable or field replaceable parts. The module must be serviced only at an approved
manufacturing facility or service depot.
Warning:
The RDL-3000-RM is susceptible to damage from electrostatic charge.
Electrostatic Discharge (ESD) must be avoided to prevent damaging or destroying the
module. The module must always be store in an anti-static container/bag prior to
installation and following removal from the product for servicing. Observe ESD
precautions when handling the module.
module. The module must always be store in an anti-static container/bag prior to
installation and following removal from the product for servicing. Observe ESD
precautions when handling the module.
3.3 Professional Installation
Devices containing the Redline RDL-3000-RM require professional installation. It is the
responsibility of the installer understand the product operation by attending training
as required, reading and understanding the product documentation, and ensuring
that all building, safety and regulatory codes are met and the installation is complete
and secure.
responsibility of the installer understand the product operation by attending training
as required, reading and understanding the product documentation, and ensuring
that all building, safety and regulatory codes are met and the installation is complete
and secure.
3.4 Safety Precautions
Installation and service must be done by personnel having technical training and
experience necessary to be aware of hazards during installation and/or service of RF
equipment. The installation and/or service must be done using procedures designed to
minimize any danger to technical personnel or any other person.
experience necessary to be aware of hazards during installation and/or service of RF
equipment. The installation and/or service must be done using procedures designed to
minimize any danger to technical personnel or any other person.
3.5 Radio Frequency Safety
The installer of this radio equipment must ensure that the antenna is located or pointed
such that it does not emit RF fields in excess of the general population limits as defined
by FCC CFR 47, Part 2.1091, Radio frequency radiation exposure evaluation for fixed
devices & Health Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada
such that it does not emit RF fields in excess of the general population limits as defined
by FCC CFR 47, Part 2.1091, Radio frequency radiation exposure evaluation for fixed
devices & Health Canada limits for the general population; consult Safety Code 6,
obtainable from Health Canada
’s website:
Refer to the regulator statements included in this document.