GN Otometrics A/S 001010 Manuel D’Utilisation

NOAHlink Users Manual

5

The following steps describe how to prepare for NOAHlink™
installation and how to install your unit:

1.  Before installing NOAHlink, you must install a Bluetooth

device in your PC. Check whether this device is installed by
right-clicking My Computer on your desktop, then selecting
Properties from the pull-down menu. This opens the System
Properties window. Open the Hardware tab. Click on Device
Manager. Double-click on Ports to discover whether
Bluetooth Communications Ports are listed. If these are
listed, move to Step 3.

2.  Before choosing and installing a Bluetooth device, refer to the

NOAHlink page on HIMSA’s web site at 

www.himsa.com

 for

a list of devices tested with NOAHlink.

3.  Place either a rechargeable or an alkaline battery in your

NOAHlink unit. (NOTE: You will first need to charge the
rechargeable battery.) Refer to Sections 6.1.1 and 6.1.2 for
further details.

4.  Follow the NOAHlink installation instructions in Section 6.2.

5.  Set up the Bluetooth connection to NOAHlink by referring to

the NOAHlink page on HIMSA’s web site at 

www.himsa.com

.

6.  Refer to Chapter 8 in order to configure your NOAHlink unit.

7.  Refer to the NOAHlink page on HIMSA’s web site at

www.himsa.com

 for a list of fitting modules which support

NOAHlink. These modules can use NOAHlink for
programming hearing instruments.