D.O.Tel Co. Ltd. DOTR-900 Manuel D’Utilisation

2. Smart Navi를 사용하기 전에

…………………………………………………………………..

2.1 Connecting to host

1) Power ON / OFF 

(1) Power on - Press and hold the power switch turned on negative 

behavior Sounds. 

(2) power off - power is turned on, press and hold the power switch 

back on Shut down the power is turned off 2 seconds after the tone. 

(3) Auto-off - 5 minutes elapsed without any action, the ringing tone 10 

seconds Alerts and then automatically turns off the power. 

2) Pairing standby (Pairing ready mode) 

To turn on the power stand-by status and the status of Pairing on the 

lamp that noksaekbul Comes in flashes every two seconds. 

3) connection 

Pairing standby host and Bluetooth connections from Port 

I hear sound notifications it receives the connection command. 

(Connected with Bluetooth products available) 0.6 In this state, the 

green lamp will blink every second. 

In this state, the trigger button of the tag information to the 

host  Passes. Depending on the status of the host can make the 

necessary commands. 

Run the command received from the host state to change. 

(The host running the application, one state)