Broadcom Corporation BRCM1053 Manuel D’Utilisation

Page de 82
BIOS utility -  69
B I O S  
U T I L I T Y
The BIOS utility is a hardware configuration program built into your 
computer's BIOS.
Your computer is already properly configured and optimized, and you do 
not need to run this utility. However, if you encounter configuration 
problems, you may need to run it.
To activate the BIOS utility, press <F2> during the POST while the 
computer logo is being displayed.
Boot sequence
To set the boot sequence in the BIOS utility, activate the BIOS utility, then 
select Boot from the categories listed at the top of the screen. 
Enable disk-to-disk recovery
To enable disk-to-disk recovery (hard disk recovery), activate the BIOS 
utility, then select Main from the categories listed at the top of the screen. 
Find  D2D Recovery at the bottom of the screen and use the <F5> and 
<F6> keys to set this value to Enabled.
Setting passwords
To set a password on boot, activate the BIOS utility, then select Security
from the categories listed at the top of the screen. Find Password on 
boot:
 and use the <F5> and <F6> keys to enable this feature.