Newcont Electronic Co. Ltd. 63201 Manuel D’Utilisation

OPER

4

Safety Instructions

 
      E. If the telephone has been dropped or the case has been damaged.
      F. If the telephone exhibits a distinct change in performance.
16. Never install telephone wiring during a lighting storm.
17. Never install telephone jacks in wet locations unless the jack is specifically designed
      for wet locations.
18. Never touch uninsulated  telephone wires or terminals unless the telephone line has
       been disconnected at the network interface.
19. Use caution when installing or modifying telephone lines.

1. Use only the following type and size BATTERY PACK: 
    Cordless Telephone BATTERY PACK
    3.6V, 600mAh.
    Ni-MH BATTERY 
 
2. Do not dispose of the BATTERY PACK in a fire. It may explode. Check with local codes
    for possible special disposal instructions.
3. Do not open or mutilate the BATTERY PACK. Released electrolyte from a BATTER 
    PACK  is corrosive and may cause damage to the eyes or skin. Electrolyte may be 
    toxic if swallowed.
4. Exercise care in handling the BATTERY PACK to prevent shorting the BATTERY PACK
    with conductive material such as rings, bracelets and keys. The BATTERY PACK or
    conductor may overheat and cause burns.
5. Charge the BATTERY PACK provided with (or identified for use with) this telephone  
    only in accordance with the instructions and limitations specified in this manual.
6. Observe proper polarity orientation between the BATTERY PACK and BATTERY 
    CHARGER.

                                  

ATTENTION:
The telephone  that you have purchased contains a rechargeable BATTERY PACK. The  
BATTERY PACK  is recyclable. At the end of its useful life, under various state and local 
laws, it may be illegal to dispose of this battery into the municipal waste  stream. Check 
with your local solid waste officials for details in your area for recycling options or proper 
disposal.

                                          

This telephone enables you to store the Voice Mail Post Code number in your area.
This will automatically connect you to the Voice Mail service provider with one touch 
dialing.
1. Press the                              button and hold down.

2. Press the TELEPHONE KEYPAD           button.

3. Press the          /FLASH button.

4. Enter the Voice Mail Post Code number by using the TELEPHONE KEYPAD 
                               buttons.

5. Press and hold down the           

/RE/PA button.

6. Press the            

/RE/PA button to return to STANDBY mode.

 To turn off the Message Waiting LCD Screen indicator.

1. Press the             / VOICE MAIL button and hold down.

2. Press the TELEPHONE KEYPAD            button.

3. Press the             / FLASH button.

4. Press the SCROLL UP         or DOWN         button to select MSG Waiting ON or OFF 
    when MSG Waiting is active. 

5. Press and hold down the                       button.

6. Press the             /VOICE MAIL button to return to STANDBY mode.

IMPORTANT:
Message waiting LCD Screen indicator will automatically turn ON. If you have
subscribed to Voice Mail message service and if yo have Visual Message indication
 from your local telephone company.

Caller ID System Operation

23

/VOICE MAIL

SAVE

SAVE

SAVE

SAVE

WXYZ

OPER

WXYZ