Newcont Electronic Co. Ltd. 63201 Manuel D’Utilisation
/ VOICE MAIL
Cordless Telephone Operation
Using the Headset Feature
Your telephone can utilize a headset (not
included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Insert the small plug at the end of the headset
into the HEADSET JACK at the right side of
the HANDSET. Follow the procedures
discussed in "Receiving Calls "and" Placing
Calls" to receive and place a call.
included) to be connected to your HANDSET
for you to enjoy hands-free communication.
Insert the small plug at the end of the headset
into the HEADSET JACK at the right side of
the HANDSET. Follow the procedures
discussed in "Receiving Calls "and" Placing
Calls" to receive and place a call.
NOTE: When you plug the headset plug into
the HEADSET JACK it automatically
mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug
the headset to return the HANDSET
to normal use.
the HEADSET JACK it automatically
mutes the MICROPHONE and
SPEAKER of the HANDSET. Unplug
the headset to return the HANDSET
to normal use.
Redial Feature
1. If you get a busy tone, press the button
or place the HANDSET on the BASE UNIT to
hang up.
or place the HANDSET on the BASE UNIT to
hang up.
2. Later, press the button again.
3. Listen for a dial tone.
4. Press the button, this will automatically
redial the last telephone number you called.
redial the last telephone number you called.
5. When you have finished with your call, press
the button again or place the
HANDSET on the BASE UNIT.
the button again or place the
HANDSET on the BASE UNIT.
NOTE:
If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn
you that the Background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to
the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
If you are too far away from the BASE UNIT, the HANDSET emits "beep"sounds to warn
you that the Background noise level is too high for proper communication between the
HANDSET and the BASE UNIT. When you hear this sound, you should move closer to
the BASE UNIT to reduce the noise level. Otherwise, the call will automatically cut off.
10
Caller ID System Operation
17
Placing Calls from the PHONE BOOK
1. Press the button.
2. Press the SCROLL UP or DOWN button to find the record you want to call.
3. Press
the button to change the format of the displayed number.
Available formats Include:
Number of digits
Ten digits
Seven digits
Eleven digits
Explanation
Example
3-digit area code+
7-digit telephone number.
7-digit telephone number.
7-digit telephone number.
Long distance code "1"
+3 - digit area cod
+7 - digit telephone number.
+3 - digit area cod
+7 - digit telephone number.
4. Press the button to dial the number displayed in the screen.
5. To end your conversation, either press the button or place the HANDSET
on the BASEUNIT.
5. To end your conversation, either press the button or place the HANDSET
on the BASEUNIT.
NOTE: If the phone company does not supply all ten digits of an incoming caller, you
will not be allowed to adjust the format of that number.
will not be allowed to adjust the format of that number.
566-327-4466
1-566-327-4466
327-4466
RE/PA
SAVE
DIR
DIR
TALK
TALK
HEADSET
MICROPHONE
SPEAKER
HEADSET
PLUG(2.5mm)
PLUG(2.5mm)
HEADSET JACK
TALK
WXYZ
PQRS
OPER
TALK
TALK
TALK