Newcont Electronic Co. Ltd. NTP-6309 Manuel D’Utilisation

Caller ID System Operation

17

1. Press the         button.

2. Press the SCROLL UP        or DOWN         button to find the record you want to call.

3. Press

 

 the                           button to change the format of the displayed number.

    Available formats Include:
    

 
    

Number of digits              

Ten digits                            
                                         

Seven digits                     
                                         

Eleven digits                      

Explanation

Example

3-digit area code+
7-digit telephone number.

7-digit telephone number.

                                           Long distance code "1"
                                           +3 - digit area cod
                                           +7 - digit telephone number.         

 4. Press the                 button to dial the number displayed in the screen.
    
 5. To end your conversation, either press the                 button  or place the HANDSET 
     on the BASEUNIT.

 NOTE: If the phone company does not supply all ten digits of an incoming caller, you
             will not be allowed to adjust the format of that number.

566-327-4466

1-566-327-4466

327-4466

DIR

DIR

Before you can use cordless telephone ,you must charge the HANDSET for 12
 hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)

       1. Place the HANDSET on the BASE UNIT for 12 hours  .
       2. After 12 hours ,remove the HANDSET from the BASE UNIT.
       3. Raise or reposition the BASE UNIT ANTENNA for the best reception.

  

NOTE:
Depending on the frequency of use, once the HANDSET is fully charged , it remains
 functional for approximately 4 hours of continuous use and approximately three days 
when the HANDSET is off the BASE UNIT in STANDBY mode.

1.  When the phone rings, lift the HANDSET and
     press the            button. The HANDSET LCD 
     Screen will display "CALLS" and  "TALK",and
     the BASE UNIT IN USE LED indicator will 
     light up.
2. Start your conversation
3. To  end  your  conversation,  either  press  the             
                 button or place the HANDSET  on  the 
     BASE UNIT.  If  you place the HANDSET on the 
     BASE UNIT CHARGE CRADLE, you activate 
     the automatic STANDBY feature. 

NOTES:
1. The Call Timer will start to count once you press the              button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
    TELEPHONE KEYPAD buttons. 

Cordless Telephone Operation

8

 CALLS

When "CALLS"appears on the LCD Screen,
it  means the HANDSET IS OFF-HOOK
(connected to the telephone line).

Minutes

Call Timer Display

Seconds or Channel (Press the scan/del
button to display the channel).