Newcont Electronic Co. Ltd. NTP-6309 Manuel D’Utilisation
NOTES:
1. You can store a maximum of 16 characters on the letter icon.
2. You can store a maximum of 16 digits on the number icon.
1. You can store a maximum of 16 characters on the letter icon.
2. You can store a maximum of 16 digits on the number icon.
Security System
Your cordless telephone uses a digital coding security system to prevent unauthorized
use of your telephone line by another nearby cordless telephone. The system has its
own identifying signal created by microcomputers in both the BASE UNIT and the
HANDSET.
use of your telephone line by another nearby cordless telephone. The system has its
own identifying signal created by microcomputers in both the BASE UNIT and the
HANDSET.
Security Code
This telephone has an internal security code with 65,536 possible combinations.
Resetting Security Code and Channel Information
Communication between HANDSET and BASE UNIT may not be possible in any of
the following situations:
1. After a power failure.
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.
3. After replacing the HANDSET BATTERY PACK.
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
the following situations:
1. After a power failure.
2. After relocating the BASE UNIT by disconnecting the AC ADAPTOR.
3. After replacing the HANDSET BATTERY PACK.
To reset, place the HANDSET on the BASE UNIT for 2 to 5 seconds.
Multi-Channel Access
Your cordless telephone lets you select a channel from the 40 frequencies available to
transmit signals between the BASE UNIT and the HANDSET. When you notice
interference from other cordless telephones, change to another channel by pressing
the /
transmit signals between the BASE UNIT and the HANDSET. When you notice
interference from other cordless telephones, change to another channel by pressing
the /
SCAN
button on the HANDSET.
Security
25
DEL
This equipment complies with FCC REGULATIONS 15 and 68 of the Federal Communic-
ations Commission (FCC) rules for the United States. A label is located on the underside
of the base unit containing the FCC registration number and Ringer Equivalence Number
(REN) You must, upon request, provide this information to your local telephone company.
This equipment is compatible with inductively coupled hearing aids.
ations Commission (FCC) rules for the United States. A label is located on the underside
of the base unit containing the FCC registration number and Ringer Equivalence Number
(REN) You must, upon request, provide this information to your local telephone company.
This equipment is compatible with inductively coupled hearing aids.
FCC Part 15
Warning: Changes or modifications to this unit not expressly approved by the party respo-
nsible for compliance could void the user's authority to operate the equipment.
The equipment has been tested and found to comply with part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet or on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Privacy of communications may not be ensured when using this phone.
nsible for compliance could void the user's authority to operate the equipment.
The equipment has been tested and found to comply with part 15 of the FCC rules. These
limits are designed to provide reasonable protection against harmful interference in a resi-
dential installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try and correct the interference by one or more of the following
measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet or on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Information:
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.
Privacy of communications may not be ensured when using this phone.
FCC Part 68
The FCC requires that you connect your cordless telephone to the nationwide telephone
network through a modular telephone jack (USOCRJ11C or RJ11W). Your telephone
company may discontinue your service if your equipment causes harm to the telephone
network. They will notify you in advance of disconnection, if possible. During notification,
you will be informed of your right to file a complaint with the FCC. If it is determined that
your telephone equipment is manufacturing, the FCC requires that it not be used and that
it be unplugged from the modular jack until the problem has been corrected. Repairs to
this telephone equipment can only be made by the manufacturer or its authorized agents
or by others who may be authorized by the FCC. For repair procedures, follow the instru-
ctions outlined under the Newcont Warranty. The REN is useful in determining the number
of devices you may connect to your telephone line and still enable the devices to ring when
you receive a call. The general rule is that the REN value should not exceed 5.0 total;
however, contact your local telephone company for the specific number in your area.
network through a modular telephone jack (USOCRJ11C or RJ11W). Your telephone
company may discontinue your service if your equipment causes harm to the telephone
network. They will notify you in advance of disconnection, if possible. During notification,
you will be informed of your right to file a complaint with the FCC. If it is determined that
your telephone equipment is manufacturing, the FCC requires that it not be used and that
it be unplugged from the modular jack until the problem has been corrected. Repairs to
this telephone equipment can only be made by the manufacturer or its authorized agents
or by others who may be authorized by the FCC. For repair procedures, follow the instru-
ctions outlined under the Newcont Warranty. The REN is useful in determining the number
of devices you may connect to your telephone line and still enable the devices to ring when
you receive a call. The general rule is that the REN value should not exceed 5.0 total;
however, contact your local telephone company for the specific number in your area.
FCC REGULATIONS
G