Newcont Electronic Co. Ltd. NTP-6309 Manuel D’Utilisation
/ VOICE MAIL
TALK
TALK
Caller ID System Operation
17
Placing Calls from the PHONE BOOK
1. Press the button.
2. Press the SCROLL UP or DOWN button to find the record you want to call.
3. Press
the button to change the format of the displayed number.
Available formats Include:
Number of digits
Ten digits
Seven digits
Eleven digits
Explanation
Example
3-digit area code+
7-digit telephone number.
7-digit telephone number.
7-digit telephone number.
Long distance code "1"
+3 - digit area cod
+7 - digit telephone number.
+3 - digit area cod
+7 - digit telephone number.
4. Press the button to dial the number displayed in the screen.
5. To end your conversation, either press the button or place the HANDSET
on the BASEUNIT.
5. To end your conversation, either press the button or place the HANDSET
on the BASEUNIT.
NOTE: If the phone company does not supply all ten digits of an incoming caller, you
will not be allowed to adjust the format of that number.
will not be allowed to adjust the format of that number.
566-327-4466
1-566-327-4466
327-4466
DIR
DIR
Preparing for Use
Before you can use cordless telephone ,you must charge the HANDSET for 12
hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)
hours. Failure to do so will require recharging of the BATTERY PACK more often.
(See page 26 for more information on the BATTERY PACK)
1. Place the HANDSET on the BASE UNIT for 12 hours .
2. After 12 hours ,remove the HANDSET from the BASE UNIT.
3. Raise or reposition the BASE UNIT ANTENNA for the best reception.
2. After 12 hours ,remove the HANDSET from the BASE UNIT.
3. Raise or reposition the BASE UNIT ANTENNA for the best reception.
NOTE:
Depending on the frequency of use, once the HANDSET is fully charged , it remains
functional for approximately 4 hours of continuous use and approximately three days
when the HANDSET is off the BASE UNIT in STANDBY mode.
Depending on the frequency of use, once the HANDSET is fully charged , it remains
functional for approximately 4 hours of continuous use and approximately three days
when the HANDSET is off the BASE UNIT in STANDBY mode.
Receiving calls
1. When the phone rings, lift the HANDSET and
press the button. The HANDSET LCD
Screen will display "CALLS" and "TALK",and
the BASE UNIT IN USE LED indicator will
light up.
2. Start your conversation
3. To end your conversation, either press the
button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the
BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
press the button. The HANDSET LCD
Screen will display "CALLS" and "TALK",and
the BASE UNIT IN USE LED indicator will
light up.
2. Start your conversation
3. To end your conversation, either press the
button or place the HANDSET on the
BASE UNIT. If you place the HANDSET on the
BASE UNIT CHARGE CRADLE, you activate
the automatic STANDBY feature.
NOTES:
1. The Call Timer will start to count once you press the button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.
1. The Call Timer will start to count once you press the button.
2. The LCD Screen emits light for 8 seconds every time you press any of the
TELEPHONE KEYPAD buttons.
Cordless Telephone Operation
8
CALLS
When "CALLS"appears on the LCD Screen,
it means the HANDSET IS OFF-HOOK
(connected to the telephone line).
it means the HANDSET IS OFF-HOOK
(connected to the telephone line).
Minutes
Call Timer Display
Seconds or Channel (Press the scan/del
button to display the channel).
button to display the channel).
CALLS
TALK