Microsoft Corporation RM-132X Manuel D’Utilisation
Personalize your device
103
When you choose a tone,
Tone downloads
(network
service) opens a list of bookmarks. You can select a
bookmark and start connection to a Web page to
download tones.
bookmark and start connection to a Web page to
download tones.
If you want the caller’s name to be said when your device
rings, select
rings, select
Options
>
Personalise
, and set
Say caller's
name
to
On
. The caller’s name must be saved in
Contacts
.
To create a new profile, select
Options
>
Create new
.
Offline profile
The
Offline
profile lets you use the device without
connecting to the wireless network. When you activate the
Offline
profile, the connection to the wireless network is
turned off, as indicated by
in the signal strength
indicator area. All wireless RF signals to and from the
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
device are prevented. If you try to send messages, they are
placed in the outbox to be sent later.
Important: In the offline profile you cannot make or
receive any calls, or use other features that require
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
cellular network coverage. Calls may still be possible to
the official emergency number programmed into your
device. To make calls, you must first activate the phone
function by changing profiles. If the device has been
locked, enter the lock code.
To leave the
Offline
profile, press the power key, and select
another profile. The device re-enables wireless
transmissions (providing there is sufficient signal
strength). If Bluetooth connectivity is activated before
entering the
strength). If Bluetooth connectivity is activated before
entering the
Offline
profile, it will be deactivated.
Bluetooth connectivity is automatically reactivated after
leaving the
leaving the
Offline
profile. See ‘Settings’, p. 89.
3-D tones
Press ,
and
select
Tools
>
3-D tones
. With
3-D tones
you can enable three-dimensional sound effects for
ringing tones. Not all ringing tones support 3-D effects.
ringing tones. Not all ringing tones support 3-D effects.
To enable the 3-D effects, select
3-D ringing tone
effects
>
On
. To change the ringing tone, scroll to the
ringing tone that is displayed, press
, and select the
desired ringing tone.
To change the 3–D effect that is applied to the ringing
tone, select
tone, select
Sound trajectory
and the desired effect. To
modify the effect, select from the following settings:
Trajectory speed
—Select the speed at which sound moves
from one direction to another. This setting is not available
for all effects in
for all effects in
Sound trajectory
.
Reverberation
—To adjust the amount of echo, select the
desired effect in the list.
R1108_en.book Page 103 Thursday, August 21, 2008 2:55 PM