Agrident Corporation AIR200 Manuel D’Utilisation
AIR200 Installation
10.07.06
Page 4 of 11
1. Introduction
The ISO reader module AIR200 is designed as an integrated reader head for the handheld
computer Workabout PRO M/C by PSION TEKLOGIX. It combines the reading of ISO
transponders with the Windows CE software of the PSION
computer Workabout PRO M/C by PSION TEKLOGIX. It combines the reading of ISO
transponders with the Windows CE software of the PSION
®
-workabout PRO. Together with the
external antenna AEA080 from Agrident, the reading of bolus or ear tags is much more
convenient. The AIR200 is compatible to ISO 11784/5. It reads HDX and FDX-B transponders
also as H4002 compatible transponders.
To install the AIR200 module in a Workabout PRO handheld, please follow the instructions
below.
convenient. The AIR200 is compatible to ISO 11784/5. It reads HDX and FDX-B transponders
also as H4002 compatible transponders.
To install the AIR200 module in a Workabout PRO handheld, please follow the instructions
below.
2. Specification
Module: AIR200
Interface:
Interface:
AAB10 adapter board
Coverage transponder:
HDX, FDX-B (ISO 11784/5), H4002
Reading distance:
up to 150 mm with FDX-B transponder Ø 30 mm
up to 200 mm with HDX transponder Ø 30 mm
up to 200 mm with HDX transponder Ø 30 mm
Dimension:
190 x 100 x 35 mm
Weight:
appr. 140 g
Handheld:
PSION TEKLOGIX Workabout PRO M/C only
External Antenna:
Agrident AEA080
3. Installation
3.1 Installation of the AIR200 reader
1.
TheAIR 200 mounting set consists of 2 screws
with washer and an adapter board with 4
screws.
TheAIR 200 mounting set consists of 2 screws
with washer and an adapter board with 4
screws.
2.
Remove the pen.
Remove the pen.