Malibu Networks Inc. AM241 Manuel D’Utilisation

Installation and Configuration

Ethernet works, 
but the radio 
modem does not

If you can Ping the CPE or BTS from 
the LAN side, but a PC on another 
CPE or BTS within the cell area cannot 
Ping it, then its radio modem may not 
be working. Enter the IP number of the 
suspected CPE/BTS from a PC 
browser attached to its local LAN and 
then if the AirMAX configuration pages 
load up, then verify it has a matching 
SSID value, verify the CELL ID as 
reported by the BTS is detected by the 
CPE, check signal strength, ensure 
power level is at maximum, and if 
those measures don t remedy the 
problem, then try rebooting the CPE/
BTS.  

Also, verify that a subscriber and 
appropriate rule(s) have been 
configured for that CPE (see QoS 
Management From the BTS, 
presented earlier in this Chapter)