Technalogix Ltd. P379 Manuel D’Utilisation
P-379 Processor
6
3.0
D
ESCRIPTION AND
S
PECIFICATIONS
General Description
The P-379 contains the latest in television electronics, including synthesized crystal-
referenced phase-locked-loop oscillators, microprocessor control, saw-filtered if and
hybrid amplifiers. In addition to these features, the U.S. version contains automatic input
offset programming to remove input offsets inherent to off-air channels (0,
referenced phase-locked-loop oscillators, microprocessor control, saw-filtered if and
hybrid amplifiers. In addition to these features, the U.S. version contains automatic input
offset programming to remove input offsets inherent to off-air channels (0,
±10KHz),
cable standard channels (0, +12.5KHz, +25KHz) and Cable HRC channels (0.3KHz
master oscillator offset).
master oscillator offset).
Standard Features
• Totally Microprocessor Controlled with Self-Diagnostic Monitoring
• Selectable Input Channels
• Off-Air Channels:
2 through 83 (VHF & UHF)
• Cable Standard Channels: 2 through 181 (54MHz through 1.2GHz)
• Cable HRC Channels:
1 through 181 (54MHz through 1.2GHz)
• Selectable
Output
Channels
• Cable Standard Channels: T7 through 118 (7MHz through 750MHz)
• Cable HRC Channels:
1 through 181
• Selected Using Internal Switch
• Automatic Input Offset Control
• Detects and Corrects Input Signal Offset Frequency for Heterodyne Processing
before the IF
• SAW-filtered IF - Designed for Adjacent Channel Operation
• +60dBmV Output Using Low-Distortion Hybrid Amplifiers
• Non-volatile Channel Memory
• Synthesized
Oscillators
• Crystal
Referenced
• Phase
Locked
• Digital LED Readout
• RF Muted During Tuning
• Surface Mount Technology (SMT) Construction
Available Options
• “T” Input Channels
Available Options
• “T” Input Channels
• Dual RS232 Control for Daisy Chain Capability
• Defeat able AGC for Manual Gain Control (MGC)