Rehabtronics Inc. HSST1 Manuel D’Utilisation
31
Fitting the GARMENT
Once all four ELECTRODES are wet and attached to the GARMENT, the GARMENT can be fitted on the
arm as follows:
arm as follows:
1. Loosely thread the GARMENT’s STRAPS
through the CLASPS, creating a wide “sleeve”
shape.
through the CLASPS, creating a wide “sleeve”
shape.
2. With the GARMENT’s STIM HOLDER on top,
insert the arm through the GARMENT.
insert the arm through the GARMENT.
3. Tighten and secure the STRAPS so that the
ELECTRODES are pressed firmly against the
skin, and the GARMENT does not twist or slide
on the arm.
ELECTRODES are pressed firmly against the
skin, and the GARMENT does not twist or slide
on the arm.
CAUTION: Do not over-tighten to the
point of restricting blood-flow to the
hand.
point of restricting blood-flow to the
hand.