Euro Communication Equipement SAS BTONE Manuel D’Utilisation
D. Power On/Off
Power On: Press the MFB (1) for 1 second. The Bluetooth Indicator (7) will
turn blinking blue.
Power Off: Press and hold the MFB (1) for 5 seconds until the Bluetooth
Indicator (7) turns red.
E. Pairing to your Bluetooth Mobile Phone
Pair the SUPERTOOTH ONE to your Bluetooth mobile phone to create the link
or audio connection between the two. This has to be done only at the first
connection to a phone.
or audio connection between the two. This has to be done only at the first
connection to a phone.
1. From OFF, press and hold the MFB (1) for 5 seconds until the Bluetooth
Indicator (7) turns blinking red/blue. The kit is now in pairing mode.
2. While the kit is in pairing mode, access the Bluetooth menu of your phone.
Turn on the Bluetooth function then execute a Bluetooth search. (See your
phone’s manual.)
phone’s manual.)
3. When the phone displays the list of Bluetooth devices, select ST ONE.
4. When the phone asks for the password, enter 0000 and press Ok.
Important Note: The kit is paired now. Most phones automatically connect to
the kit after pairing. With some phones you need to connect manually after
pairing. Go back to Bluetooth > Paired devices > highlight ST ONE > press
Options > then press Connect.
the kit after pairing. With some phones you need to connect manually after
pairing. Go back to Bluetooth > Paired devices > highlight ST ONE > press
Options > then press Connect.
The kit is now ready to use.
F. Installation
1. Place the clip in the slots at the back of the SUPERTOOTH ONE.
2. Slide the clip to its closed side until it locks.
3. The closed side of the clip should be aligned with the top or the bottom of the
2. Slide the clip to its closed side until it locks.
3. The closed side of the clip should be aligned with the top or the bottom of the
SUPERTOOTH ONE.
Note : The clip can be attached to the unit in 2 ways, to suit any position on the
sunvisor.
3