Actiontec Electronics Inc. SBWD700A Manuel D’Utilisation
Welcome!
Step
2
Plug one end of the HDMI/VGA cable into the HDMI/
VGA Out port on the Receiver, and the other end into an
available HDMI/VGA port on the HDTV/Projector.
Step
3
Plug the connector of the power cord into the DC IN
port of the Receiver, and the AC adapter into a power outlet.
A
Install the Receiver
Thank you for your purchase of a ScreenBeam Enterprise Wire-
less Display Receiver (hereinafter referred to as the Receiver).
The Receiver connects to your Intel WiDi or Miracast-capable
device wirelessly, and displays the device’s screen on your
HDTV.
Step
1
Get the Receiver, power adapter, and HDMI cable or
VGA cable from the Receiver’s box.
Step
4
Press the On/Off button to switch the power on.
Note: You can switch the receiver off by pressing the On/Off
button again.