Z Com Inc 000580 Manuel D’Utilisation

 

Nov/5th/2002 

1

The next-generation wireless LAN device – 11Mbps Wireless LAN Smart Access Point, 

brings Ethernet-like performance to the wireless realm. Fully compliant with IEEE802.11b 

standard, the 11Mbps Wireless LAN Smart Access Point also provides powerful features 

such as the Windows-based configuration utility, WEP security, SNMP and more. 

Maximize network efficiency while minimizing your network investment and maintenance 

costs. 

11Mbps Wireless LAN Smart Access Point x 1            AC Power Adapter x 1 

Software and Documentation CD

 

x 1   

 

 

  Quick Installation Guide x 1 

 If any of the above items are missing or damaged, contact your local 

dealer for support. 

 

  Connect the Wireless LAN Smart Access Point to a hub or a PC with its UTP 

Ethernet cable. Please note that, use the cross-over cable when you directly connect 

the Wireless LAN Smart Access Point to a PC. 

  Connect the power adapter to the power socket on the Wireless LAN Smart Access 

Point, and plug the other end of the power pack into an electrical outlet. 

ONLY use the power adapter supplied with the Wireless LAN 

Smart Access Point. Otherwise, the product may be damaged. 

Note 2: The button labeled “Default” enables you to restore the Wireless LAN 

Smart Access Point’s default setting. This is used when you forget the 

password. Please detach the DC power plug and press the “DEFAULT” button 

on the side panel of the Wireless LAN Smart Access Point. Reconnect the 

power and keep holding the button for 3 seconds then release it and press and 

keep holding it again for 10 seconds until the WLAN and LAN LED indicators 

become blinking rapidly. This will restore the Wireless LAN Smart Access