Z Com Inc 0XA622H Manuel D’Utilisation
circuit.
extension cables, frayed power cords, and missing safety grounds.
λ
λ
If an electrical accident occurs, proceed as follows:
–
Use caution; do not become a victim yourself.
–
Disconnect power from the system.
–
If possible, send another person to get medical aid. Otherwise, assess the condition of
the victim and then call for help.
–
Determine if the person needs rescue breathing or external cardiac compressions;
then take appropriate action.
- 7 -
- 7 -
4.4.
Installing a
XA-622H
λ
Remove the
XA-622H
module from its protective packaging.
λ
Avoiding Electrostatic Discharge
Before you install the
XA-622H
module, ground yourself by touching a
piece of metal to avoid electrostatic discharge (ESD). You should also
take the following precautions to prevent damage to the XA-622H
module:
λ
λ
Keep the
XA-622H
module in its antistatic-shielded bag until
you are ready to install it.
λ
λ
Handle the
XA-622H
module by its edges.
λ
Ensure the connector is connected to above Model’s board tightly.
IMPORTANT NOTE: To comply with FCC RF exposure compliance requirements,
the antenna used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be
separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.