Z Com Inc 0XG950 Manuel D’Utilisation
-
32
-
Thus, the RTS Threshold mechanism provides a solution to prevent data collisions. When you
enable RTS Threshold on a suspect “hidden station”, this station and its Access Point will use a
Request to Send (RTS). The station will send an RTS to the Access Point, informing that it is
going to transmit the data. Upon receipt, the Access Point will respond with a CTS message to
all station within its range to notify all other stations to defer transmission. It will also confirm
the requestor station that the Access Point has reserved it for the time-frame of the requested
transmission.
If the “Hidden Node” problem is an issue, please specify the packet size. The RTS mechanism
will be activated if the data size exceeds the value you set. It is highly recommended that you set
the value ranging from 0 to 1500. The default value is Disable.
Warning: Enabling RTS Threshold would cause redundant network overhead that
could negatively affect the throughput performance instead of providing a remedy.
Frag. Threshold
Fragmentation mechanism is used for improving the efficiency when high traffic flows along
in the wireless network. If your 802.11g Wireless LAN PCI Card often transmit large files in
wireless network, you can enable the Fragmentation Threshold by clicking the Enable button
and the mechanism will split the packet. The value can be set from 256 to 1500. The default
value is Disable.
IRQ NO/IO Address
To avoid device conflict, you may modify the IRQ No. IO Address for your device (Only
available under Windows NT).