Digi International Inc XBEEPRO2 Manuel D’Utilisation
XBee®/XBee‐PRO® ZB RF Modules
© 2011 Digi International, Inc.
153
Transmitters for Detachable Antennas
This device has been designed to operate with the antennas listed in the previous table and having a
maximum of 17.5 dB. Antennas not included in this list or having a gain greater than 17.5 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
maximum of 17.5 dB. Antennas not included in this list or having a gain greater than 17.5 dB are strictly
prohibited for use with this device. The required antenna impedance is 50 ohms.
Detachable Antenna
To reduce potential radio interference to other users, the antenna type and gain should be so chosen that
the equivalent, isotropically radiated power (e.i.r.p.) is not more than permitted for successful
communication.
the equivalent, isotropically radiated power (e.i.r.p.) is not more than permitted for successful
communication.
Australia (C-Tick)
These modules comply with requirements to be used in end products in Australia. All products with EMC
and radio communications must have a registered C-Tick mark. Registration to use the compliance mark
will only be accepted from Australian manufacturers or importers, or their agent, in Australia.
and radio communications must have a registered C-Tick mark. Registration to use the compliance mark
will only be accepted from Australian manufacturers or importers, or their agent, in Australia.
In order to have a C-Tick mark on an end product, a company must comply with a or b below.
a. have a company presence in Australia.
b. have a company/distributor/agent in Australia that will sponsor the importing of the end
product.
product.
Contact Digi for questions related to locating a contact in Australia.