Digi International Inc XBEEPRO2 Manuel D’Utilisation

The commissioning pushbutton definitions provide a variety of simple functions to aid in deploying devices in a 
network. The commissioning button functionality on pin 20 is enabled by setting the D0 command to 1 (enabled 
by default).

Button presses may be simulated in software using the ATCB command. ATCB should be issued with a 
parameter set to the number of button presses to execute. (e.g. sending ATCB1 will execute the action(s) 
associated with a single button press.)

1

• Wakes an end device for 

30 seconds

• Sends a node identifica-

tion broadcast transmis-

sion

• Wakes an end device for 

30 seconds

• Blinks a numeric error 

code on the Associate pin 

indicating the cause of 

join failure (see section 

6.4.2).

2

• Sends a broadcast trans-

mission to enable joining 

on the coordinator and all 

devices in the network for 

1 minute. (If joining is 

permanently enabled on a 

device (NJ = 0xFF), this 

action has no effect on 

that device.)

• N/A

4

• Causes the device to leave 

the PAN.

• Issues ATRE to restore 

module parameters to 

default values, including 

ID and SC.

• The device attempts to 

join a network based on 

its ID and SC settings.

• Issues ATRE to restore 

module parameters to 

default values, including 

ID and SC.

• The device attempts to 

join a network based on 

its ID and SC settings.

XBee

20

15

Push button

R

Associate 

LED