Ezkey Corp. EZ7000RF Manuel D’Utilisation
© Copyright 1995-2002 EzKey CORP. all rights reserved User’s Guide Version 1.2 Page: 3 / 28
Microsoft Office 97 / 2000 / XP or later (Recommended not require)
Microsoft Internet Explorer 5.0 or later (Win98 or later build-in already)
CD-ROM or DVD drive（for CD and Video operation）
Standard sound card for CD and Video operation (Recommended not require)
Two available PS/2 port, If build with optional “PS2 to USB adapter”, it require one available USB
port support.
Note:
“Sleep” hot key functionality on the keyboard that is only available if your system supports
power management (ACPI), if this is enabled and all the peripherals (e.g. VGA, Sound card… )
are compatible with the power management.
power management (ACPI), if this is enabled and all the peripherals (e.g. VGA, Sound card… )
are compatible with the power management.
The Windows NT cannot support USB function. So, the Keyboard only supports PS2 port while
running on Windows NT system.
running on Windows NT system.
Go Top
3. Quick Hardware Installation:
•
PS2 only and without optional “PS2 to USB adapter”
1.
Make sure your PC is switch off. Connect the receiver to your PC by plugging in the
receiver’s green connector into the mouse port of your PC and the purple connector
into the keyboard.
receiver’s green connector into the mouse port of your PC and the purple connector
into the keyboard.
2.
Take the Keyboard and make sure the batteries on the back are installed correctly.
（Follow the polarity signs in the battery compartment.）
（Follow the polarity signs in the battery compartment.）
3.
Take the mouse and make sure the batteries on the back are installed correctly.
（Follow the polarity signs in the battery compartment.）
（Follow the polarity signs in the battery compartment.）
4.
Turn On your PC, the mouse and keyboard (expect special hot key and wheel）will
work properly.
work properly.
5.
In case you got trouble, try the alternate channel for the receiver, keyboard and
mouse in case the initially selected channel（by factory）appears to work improperly,
other devices in the vicinity of the receiver may cause interference. You can follow the
below description to change channel and ID and fix the problem.
mouse in case the initially selected channel（by factory）appears to work improperly,
other devices in the vicinity of the receiver may cause interference. You can follow the
below description to change channel and ID and fix the problem.
•
Channel and ID Setting
1.
Press connection push button on the top side of receiver once. The receiver
connection light will flash and wait for connect with keyboard and mouse.
connection light will flash and wait for connect with keyboard and mouse.
2.
Press connection push button on bottom side of the keyboard once. The connection
process start（set new channel and ID）and receiver connection light will change the
flashing speed then back to normal speed after the connection successful.
process start（set new channel and ID）and receiver connection light will change the
flashing speed then back to normal speed after the connection successful.
3.
Press connection push button on the bottom side of the mouse once. The connection
process start（set new channel and ID）and receiver connection light will change the
flashing speed then remain steadily lit after keyboard /mouse connection successful
process start（set new channel and ID）and receiver connection light will change the
flashing speed then remain steadily lit after keyboard /mouse connection successful