CyberTAN Technology Inc. RV315W Manuel D’Utilisation
System Management
Configuring Remote Management
Cisco RV315W Broadband Wireless VPN Router Administration Guide
97
9
Configuring Remote Management
You can access web-based Configuration Utility from the LAN side by using the
RV315W’s LAN IP address and HTTP, or from the WAN side by using the
RV315W’s WAN IP address and HTTPS (HTTP over SSL) or HTTP.
RV315W’s LAN IP address and HTTP, or from the WAN side by using the
RV315W’s WAN IP address and HTTPS (HTTP over SSL) or HTTP.
Configuring Remote Access Protocols and Ports
The RV315W allows remote management securely by using HTTPS or HTTP, for
example, https://xxx.xxx.xxx.xxx:443.
example, https://xxx.xxx.xxx.xxx:443.
To configure the protocol and port number for remote management:
STEP 1
Click System Management > Remote Management > Remote Access
Protocols and Ports. The Remote Access Protocols and Ports page opens.
Protocols and Ports. The Remote Access Protocols and Ports page opens.
STEP 2
Enter the following information:
•
HTTP: Click Enable to enable remote management by using HTTP, or click
disable to disable it.
disable to disable it.
•
HTTP Listen Port Number: If you enable remote management by using
HTTP, enter the port number. By default, the listen port number for HTTP is
80.
HTTP, enter the port number. By default, the listen port number for HTTP is
80.
•
HTTPS: Click Enable to enable remote management by using HTTPS, or
click disable to disable it. We recommend that you use HTTPS for secure
remote management.
click disable to disable it. We recommend that you use HTTPS for secure
remote management.
•
HTTPS Listen Port Number: If you enable remote management by using
HTTPS, enter the port number. By default, the listen port number for HTTP is
443.
HTTPS, enter the port number. By default, the listen port number for HTTP is
443.
STEP 3
Click OK to save your settings.