Sunpark Electronics Corp U1-2HOUVW Manuel D’Utilisation

Model :  U1-2HOUVW 
 
CAUTIONARY NOTES: Do not use this equipment for other than intended use. 
1.  Verify that the line voltage matches the ballast voltage. 
2.  Installation to be made by a qualified person in accordance with applicable codes. 
 
This product may cause interference to radio equipment and should not be installed 
near maritime safety communications equipment or other critical navigation or 
communication equipment operating between 0.45-30 MHz. 
 
 
 
Features  

  120V- 230V AC input  
  High power factor: > 0.95 
  2 lamps in parallel. 
  Flexibility in different size of HO lamp. 
  Class P 
  Sound rating A 
  UL, cUL recognized. File E177888 
  Indoor use.  

 
Lamp type & power consumption : 
 
Before installation 
1.  Disconnect line voltage before installing or replacing lamp. 

t be grounded. 

.  Please connect the lamp with ballast according to the label on the ballast. Ballast 

only the same type lamps specified on the product label. 

 

2.  Ballast case mus
3.  Place the ballast to a stable support and fix it. 
 
Installation 
1

supports 

2.  Connect the AC power line. Connect the black wire to L terminal and white wire 

to N terminal of the AC source. 

3.  The both connection of black and white power wire must be fully insulated.