Cross Point b.v. CP301MAXRXA Manuel D’Utilisation
Technical Manual AM Systems
Cross Point Device Explorer
v4.4
Page 66 of 72
8.8.2
AM settings
The AM settings screen allows specific AM settings to be changed.
Figure 52: AM settings
The Burst frequency setting defines how many times per second a transmission burst is
send. The available options are:
send. The available options are:
@50Hz power frequency
@60Hz power frequency
37.5Hz, 50Hz (default), 75Hz and 150Hz
45Hz, 60Hz (default), 90Hz and 180Hz
The burst frequency setting is a system wide setting, which will be
applied for all connected AM devices. It is not possible to set different
burst frequencies for different entrances.
applied for all connected AM devices. It is not possible to set different
burst frequencies for different entrances.