Autostart SAW4 Manuel D’Utilisation

P. 4 User 

Guide

 AS-1525 SH 

 
To enable Idle Mode: 

1.  Press and hold the 

, 

 or 

 button on your remote transmitter while the engine 

is running. 

•  Pressing 

 or 

UNLOCK 

will unlock the doors. 

•  Pressing 

START 

will leave the doors unaffected. 

2.  The parking lights will come 

. 

3.  Remove the ignition key, exit the vehicle and lock the doors. 
The engine will go on running. It will shut down when the pre-programmed run time expires. 

Caution: Do not leave children or pets unattended in a car running in Idle Mode. 

 

Note: When enabling Idle Mode, pressing 

 or 

 will unlock the doors (if keyless 

entry is installed). 

Valet Mode 

The system can be placed in Valet Mode to disable the remote starting capabilities. If the 

vehicle needs to be serviced, or if you park it indoors, the Valet Mode will prevent the engine 

from being accidentally started by remote control. 
To put the system  i n t o   Valet Mode: 
1.  Turn the ignition key to the 

 (

) position. 

2.  Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will turn 

 and 

remain lit. 

To take the system  o u t   o f   Valet Mode: 
1.  Turn the ignition key to the 

(

) position. 

2.  Within 3 sec. press and hold the valet button for approx. 1 sec. The L.E.D. will go 

.  

The valet button can only be used if the ignition key is in the 

 (

) position. 

Ignition Valet 

This feature allows the user to enter Valet Mode by using only the Ignition key.  
To ENTER Valet Mode 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 

5 times within 10 seconds. 

2.  The Parking Light output from the Module will activate and flash 3 times indicating the 

Module is now in Valet Mode.  The LED will turn

solid. 

1.  With the key in the Ignition switch, turn the key to the 

and then 

positions 

5 times within 10 seconds. 

2.  The Parking Light output from the Module will activate and flash twice indicating the Module 

is now out of Valet Mode.  The LED will turn 

. 

“Home Valet”

 TM

 Mode 

This safety feature will remotely place the vehicle into a no-remote-start mode: if the vehicle is 

parked indoors there is no danger it will start accidentally by remote control or external trigger. 
To  E N T E R  Home Valet Mode: 

1.  Press the 

 or 

 button and,  

2.  Within 3 sec. press the 

 button until the parking lights turn 

 and remain lit for 3 sec. 

Note: Once Home Valet is activated, the vehicle will not start by remote control or external 

trigger until the ignition key is turned to the 

 (

) position.