Guillemot 5061156 Manuel D’Utilisation
Hercules Wireless N Access Point HWNAP-300
If the DHCP function is enabled on both the modem-router and on the access point at same time,
requests (data transmissions) may not be successful.
If you choose to use your access point's DHCP function, you must disable this function on the modem-router.
Please refer to your modem-router's manual to find out how to disable this function on your modem-router.
Please refer to your modem-router's manual to find out how to disable this function on your modem-router.
- In the General settings window, click the
Access point's IP configuration button.
Access point's IP configuration button.
- You can modify the Access point's IP address
(192.168.2.254, by default) and its subnet mask
(255.255.255.0, by default).
(192.168.2.254, by default) and its subnet mask
(255.255.255.0, by default).
Be sure to make a note of this IP address.
Without it, you will not be able to reconnect to
your access point.
your access point.
- If you enable DHCP, you can modify the start
IP address (192.168.2.100, by default), the end
IP address (192.168.2.200, by default) and the
lease time for these addresses (Forever is the
default value).
IP address (192.168.2.100, by default), the end
IP address (192.168.2.200, by default) and the
lease time for these addresses (Forever is the
default value).
- If you do not enable DHCP, you decide to set
the IP address for each computer yourself.
the IP address for each computer yourself.
- You can assign a domain name to this server
and a specific IP address according to the
computer's MAC address.
and a specific IP address according to the
computer's MAC address.
The table displays the list of IP and MAC
addresses added.
addresses added.
- Click the Modify button to validate your settings.
84/94 – User Manual