IDT Technology Limited SMS001 Manuel D’Utilisation

Huger board 

Mik

SMS608

User Manual

Thank you for purchasing the Huger board Mik. Please read this user manual before 

using your new product.
This product is the most state of art skateboard design on the market and Li-Po battery 

powered for high performance. It is controlled with the wireless controller and our 

dedicated App, max speed up to 25 KM/H with 20 KM travel distance per one charger 

that make you enjoy the most fun of skating.
Note: Please keep this manual handy as you use your new product. It contains practical 

step-by-step instructions, as well as technical specifications and warnings you should 

know about.

• The product is only suitable for the user over the age of 14. Children under 14 years 

of age must be accompanied by parents to play.

• Please wear protective equipments, such as: helmet, elbow and knee pads. Please wear 

the right clothes to play. Do not barefoot or play on the beach. Fasten the shoelaces, 

do not let the shoelaces contact the wheels and drive system, causing danger.

• Beginners/novices are recommended to use/practice at low speed and on a dry, flat 

surface.

•  Check  the  surroundings  before  playing.  For  the  user  who  is  unfamiliar  with  the 

operations must be far away from crowds. Improper operation may cause serious 

body injury and property damage.

• Adjust the front and rear wheels to ensure they run freely before playing.
• Adjust the flexibility of the damping shim by the locknut.
• Do not touch the motor and the brakes during running or just after use to avoid hot.
• This product is designed for people with safe driving ability. Please place the skateboard 

in a place where children under 8 years of age are not touched.

• Please comply with local laws and regulations and use it in places where electric 

skateboards are allowed.

• Please be careful to drive. Accidentally encountered obstacles in the process will cause 

the skateboard out of control. Please be careful to avoid pedestrians and other means 

of transport (such as: balance cars, skateboards, bicycles, etc.).

• Please use the skateboard in a suitable outdoor environment, and press the remote 

control after standing steadily on the skateboard. Do not arbitrarily accelerate 

skateboard in other environment.

• Do not try the action of the skateboard on the electric skateboard, such as bounce, 

jerk and other actions.

• Only play on a flat, open road. Do not play on potholes, gravels, gravel, muddy, rugged, 

ramps. Do not play on a smooth or wet ground, such as snow, ice, slippery ground, 

to prevent slipping.

• Do not use the product on the carpet or places that not suitable for playing.
• Do not use the skateboard in rain and snow.
• Do not use skateboards at night or in poor vision.
• Do not use your phone or headphones while playing.
• Do not hook the skateboard on other vehicles or drag other objects.
• Do not immerse the product in water, and the electronic drive parts will be damaged.
•  For  accessories  replacement,  only  use  the  accessories  with  the  same  type  and 

specifications.

• If you have any problem during using, operating, repairing, please contact customer 

service.

• 1x Skateboard
• 1x Remote control
• 1x Charger
• 1x USB charging cable
• Charger extra adaptor
• 2x Name card
• 1x T tool
• 1x User manual

Deck

Headlights

Turning lights

Power button

Truck

Locking screw

Navigation indicators

Charging port

Taillights

Power indicators

Forward/Reverse

Rear wheel

Front wheel

Battery compartment

Night lights

Horn

Go/Stop switch

Go/Stop switch

High/Low speed mode switch

Signal indicator

Power button

USB charging port

Horn On/Off

Scan  the  following  QR  code  or  Search  Oregon  Scientific  XXX  to  find  the App  to 

download on your smart device. The App is available on both Apple App Store and 

Google Play store.

Fully charge your skateboard and remote control before first use. Normal charging takes 

about 2.5 hours for the main unit and 1 hours for the remote.
1. Connect the supplied charger to the charging port of the skateboard, and then plug 

into a tandard household outlet.

Loosen the locking screw on the battery compartment and take out the battery pack to
charge separately. The power indicator on the charger lights red during charging, 

and turns green when fully charged.

2. Connect the supplied USB charging cable to the charging port of the remote, and 

then plug into a computer or an adapter. The power indicator for the remote lights 

red during charging and turns green when fully charged.

3. Check the App to find the power capacity of the skateboard.
4. Check the power indicators on the remote to find the power capacity of the remote.

3

Green

Full

2

Green

75%

1

Green

50%

1

Red

<25%