Darfon Electronics Corp MT1GMRX Manuel D’Utilisation

If the wireless connection is not activated between the receiver and the mouse, please 

Your mouse requires two AAA batteries for power. Replace the batteries when the low battery indicator 

 

move the mouse.

flashes as you

1. Remove the battery compartment cover from the mouse.

1. Turn on the computer. Plug the receiver into your computer’s USB port.

2. Insert two batteries as indicated by the polarity symbols (+ and –) marked inside.

2. Press and hold the mouse’s  left button, right button, and scroll wheel simultaneously. Slide the ON/OFF switch to ON, 
    

then release all buttons.

    

The indicator will be flashed during pairing status, and turned off after pairing is finished.

3. Slide the eject button in the direction of the arrow to eject the receiver.

    Insert the receiver back into the slot when not in use.

3. Slide the ON/OFF switch to OFF, then back to ON again to activate the mouse.

• When you do not plan to use your mouse for a long time, slide ON/OFF to OFF to save battery power.

• Dispose of old batteries promptly and properly. Do not burn or bury batteries.

• Do not place the mouse or the receiver on a metal surface. Metal may impair the RF communication.

• If you are having trouble operating your mouse, move it closer to the receiver.

• To prevent interference, make sure nearby computers (within 2 meters) do not have mouse receivers plugged in.

• Use only fresh batteries of the required size and recommended type.

• For optimal performance, place the mouse closer to the receiver.

• Use and store the mouse only in room temperature environments.

• Make sure batteries are installed in your mouse.

• Do not mix batteries of different size or chemistries.

• Do not place the receiver on the top of computer, wireless router, or monitor to avoid interference.

• Do not use the mouse on surfaces made of glass, black velvet, or mirror as these surfaces may disrupt function.

• If nearby RF devices cause interference, move them away from your mouse and receiver.

• Keep the mouse dry; if it gets wet, wipe it dry immediately.

• Your mouse’s cursor is motion sensitive, with a vary fast response time. If you want to slow down the cursor speed, 

   click Control Panel -> Mouse Properties -> Pointer Options to adjust the pointer speed in the Motion tab.

• Keep the mouse away from dust and dirt, and wipe it with a damp cloth occasionally to keep it looking new.
• Handle the mouse carefully; do not drop it.
• Do not modify or tamper with your mouse’s internal components. It may cause a malfunction.

• The ON/OFF switch on your mouse should be set to OFF.

• If you do not plan to use your mouse for a long time, remove the batteries. Batteries can leak chemicals that can damage 

   electronic parts.

• When your mouse is idle for about 10 minutes, the mouse will go to the sleep mode. To re-activate it, press any mouse 

   button to resume operation.
• See your operating system’s online help for additional information about mouse configuration and use.

4. Replace the battery cover.
5. Slide the ON/OFF switch to ON.
6. Plug the receiver into your computer’s USB port.

• When the mouse's battery power
   is low, the indicator will be flashed.

• When the mouse is in pairing 
   status, the indicator will be 
   finished.

Supports Auto Scroll (Windows)

Slide up to pop out 
the receiver.