SISTEMATICA S.p.A. CONTROLLER32 Manuel D’Utilisation
SISTEMATI
SISTEMATI
SISTEMATI
SISTEMATICA S.p.A.
CA S.p.A.
CA S.p.A.
CA S.p.A.
Pag. 4/4
Via S. Pertini, 17 – 12030 MANTA (CN) ITALY Tel. +39 0175 255.711 r.a. – Fax +39 0175 255.715
http://www.sistematica.it
e-mail:
info@sistematica.it
PROBLEM IDENTIFICATION AND SOLUTION
P
ROBLEM
POSSIBLE
CAUSES
SOLUTIONS
The system does not respond
to the controls
to the controls
Absence of power in the receiver unit
-Check that the emergency mushroom button on the transmitter (if present)
is in the release position.
-Check that the vehicle batterie is correctly connected to the receiver unit
-Check that the fuse inside the receiver unit is inctact, and if it is not, replace
it (see “FUSE REPLACEMENT”)
is in the release position.
-Check that the vehicle batterie is correctly connected to the receiver unit
-Check that the fuse inside the receiver unit is inctact, and if it is not, replace
it (see “FUSE REPLACEMENT”)
Incorrect connection of the cabling to
the utilities
the utilities
-Check the cabling to indicators, electro-valves etc.
Incorrect installation of the receiver
-The receiver must not be shielded by ferrous masses (see “POSITIONING
OF THE RECEIVER UNIT”)
OF THE RECEIVER UNIT”)
Incorrect replacement of the batteries
-Check that the batteries have been inserted correctly; if necessary replace
them (see “REPLACEMENT THE BATTERIES” on the manual of the
transmitter combined)
them (see “REPLACEMENT THE BATTERIES” on the manual of the
transmitter combined)
System not coded
-Re-code the system (vedi “CODIFYING THE SYSTEM”)
Blown fuse
-Replacement of the fuse on the receiver board (see “FUSE
REPLACEMENT”)
REPLACEMENT”)
Flat batteries
-Replacement of the transmitter batteries (vedi “REPLACEMENT THE
BATTERIES” on the manual of the transmitter combined)
BATTERIES” on the manual of the transmitter combined)
The GREEN led on the
remote control does not light
up when a key is pressed
remote control does not light
up when a key is pressed
Flat batteries
The system responds to the
controls in a discontinuous
way
controls in a discontinuous
way
Batteries almost flat
Using the transmitter beyond its
maximum range
Using the transmitter beyond its
maximum range
-Keep to a distance
≤
120m from the receiver
Connection to the battery and to the
utilities made with cables of unsuitable
section or lenght
utilities made with cables of unsuitable
section or lenght
-Chech that the connection to the battery and the utilities are made with
cables of suitable section and lenght
cables of suitable section and lenght
ATTACHMENTS
•
Attachment A: WIRING
•
Attachment B: EXTERNAL ANTENNA
•
Attachment C: PROPORTIONAL (PWM) (only if receiver with proportional output)
CE MARK
Declaration of conformity for Sistematica S.p.A. products can be required at: info@sistematica.it
This product may be subjected to usage restriction. Please contact info@sistematica.it for any further questions.
FCC STATEMENTS
These devices complies with Part 15 of the FCC rules.
Operation is subject to the following two conditions:
(1) these devices may not cause harmful interference and
(2) these devices must accept any interference received, including interference that may cause undesired operation.
Operation is subject to the following two conditions:
(1) these devices may not cause harmful interference and
(2) these devices must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or tv interference caused by unauthorized modifications to
these equipment. Such modifications could void the user’s authority to operate the equipments.
these equipment. Such modifications could void the user’s authority to operate the equipments.
SISTEMATICA S.p.A. Grantee Code: O8I
CONTROLLER 32 label example
FCC ID: O8ICONTROLLER32
FCC ID: O8ICONTROLLER32