Hewlett Packard Enterprise AP3950 Manuel D’Utilisation
Quick Installation Guide
AP3950 IEEE 802.11n
Managed Access Point
3CRWX395075A
1
The 3Com AP3950 Managed Access Point provides IEEE 802.11n/b/g, and 802.11n/a wireless access
to the network. The access point is designed for use with a 3Com Wireless LAN Controller, and
requires hardware installation only. All configuration for the access point takes place on the 3Com
Wireless LAN Controller.
to the network. The access point is designed for use with a 3Com Wireless LAN Controller, and
requires hardware installation only. All configuration for the access point takes place on the 3Com
Wireless LAN Controller.
You must have a wireless controller device to operate the access point. Four WLAN controller devices
can be connected to the access point:
can be connected to the access point:
•
3Com WX4400
•
3Com WX2200
•
3Com WX1200
•
3Com WXR100
Power is supplied via Power Over Ethernet (PoE). Since the throughput of the AP 3950 is greater than
100Mb/s, it is recommended that the AP 3950 be connected to a Gigabit Ethernet port. The
following 3Com PoE devices supply power to the access point:
100Mb/s, it is recommended that the AP 3950 be connected to a Gigabit Ethernet port. The
following 3Com PoE devices supply power to the access point:
•
3Com PoE Injector (such as the 3CNJ1000PSE)
•
3Com WXR100
•
3Com 4400G PoE Switch
•
3Com 5500G PoE Switch
About This Guide
This Quick Start Guide describes the basic installation of the access point. It covers the following topics:
•
•
•
Step 1: Unpacking the Access Point
•
Step 2: Preparing for Installation
•
Step 3: Mounting the Access Point
•
•
Step 5: Configuring the Access Point
•
Step 6: Checking the LED Indicators