Inovonics Wireless Corporation 3B6AVBST Manuel D’Utilisation
1
QSR Performance Solutions Drive Thru System - Operating Instructions
Batteries and Battery Charger
• Be sure batteries are charged
• Batteries take 2 to 3 hours to charge
• Be sure batteries are charged
• Batteries take 2 to 3 hours to charge
• A charge battery will last 8 to 10 hours
• When the battery voltage becomes too low, a short warble tone, occurring at five–second intervals is heard in the
headset. After 2 minutes the headset will shut off.
• Batteries only fit into charge one way, the correct way
• Charging indicator on charger will light red while battery is charging
• Charging indicator on charger will change from red to green when battery is fully charge
• Batteries should be left in charger even after they are fully charged
• Batteries should be removed from belt-pack and stored in charger when belt-pack is not being used
• Batteries should be removed from belt-pack and stored in charger when belt-pack is not being used
• Batteries not being used should stored in the charger
Charging Indicators
Charging Ports for
Batteries
Battery Charger
Installing and Removing Batteries from Belt-Pack
• Insert battery into battery compartment on belt-pack so it locks into place
• Battery will only fully insert into battery compartment the correct way
• Insert battery into battery compartment on belt-pack so it locks into place
• Battery will only fully insert into battery compartment the correct way
• To remove battery, slide battery release away from battery
Battery
Compartment
Battery
Release