Honeywell International Inc. QC900B Manuel D’Utilisation
2 - 2
Note: Please review the file, readme.rtf, in the install location prior to running the
QCID.
Connect the QC890 Verifier to the host as shown in the illustration below.
USB COM Port Emulation
Scan the following bar code to program the QC890 Verifier to emulate an RS-
232-based COM Port. After connecting the QC890 Verifier and upon successful
installation of the USB driver, the driver will use the next available COM Port.
Any QC890 Verifier that has been configured for USB COM Port emulation use
this host assigned port number. USB COM Port Emulation is the default
interface for the QC890 Verifier.
232-based COM Port. After connecting the QC890 Verifier and upon successful
installation of the USB driver, the driver will use the next available COM Port.
Any QC890 Verifier that has been configured for USB COM Port emulation use
this host assigned port number. USB COM Port Emulation is the default
interface for the QC890 Verifier.
Note: No additional configuration (e.g., baud rate) is necessary.
1
2
* USB COM Port Emulation