Sutron Corporation RLR-0003-1 Manuel D’Utilisation
Bringing the Benefits of Real-Time Data Collection to the World
36
+ If any command is followed by +, it means that as long as the command starts with the indicated
word, it will be accepted.
E.g. MEAS + means that typing “MEAS”, “MEASURE”, or “MEASXXX” will all have
E.g. MEAS + means that typing “MEAS”, “MEASURE”, or “MEASXXX” will all have
the same effect.
0 If a 0 follows a listed command, it means that the command can optionally be followed by the
character 0.
E.g. “DIAG” will show the system diagnostic status. “DIAG 0” will first show current
E.g. “DIAG” will show the system diagnostic status. “DIAG 0” will first show current
status and then clear the status.
! NOTE:
All commands may be preceded with an !. If they are, a concise reply meant for machine to
machine interaction is returned. Commands would be preceded by an ! if they were sent by
an Xpert or some such computer.
an Xpert or some such computer.
E.g. “MEAS” will show
Radar Reading
Stage 23.04 feet
Distance 23.30 feet
Good Samples 2
Total Samples 2
Standard Deviation 0.01
Signal Strength 63.5%
Stage 23.04 feet
Distance 23.30 feet
Good Samples 2
Total Samples 2
Standard Deviation 0.01
Signal Strength 63.5%
“!MEAS” will show
23.05,23.29,0.00,
2,2,0.00,63.0
2,2,0.00,63.0
List of commands
BATT +
BATT +
Shows the current battery reading.
DIAG + 0
Shows system diagnostics, including system resets. If followed by 0, it will clear system resets.
DOWNLOAD
See
LOG
EXIT
Quits command line.
HELP
Brings up the end user help (lists commands).
HI
System replies with “Hello”
Shows the
This command is used to download the log. It can be followed by optional parameters indicating
what part of the log to download.
LOG with no parameters will download since last.
“LOG ALL” gets whole log.
“LOG X” gets X last days ("LOG 3" gets last 3 days worth of data)
“LOG timeStart” gets data since provided date
“LOG timeStart timeEnd” gets data between provided dates
time can be YYYY/MM/DD HH:MM:SS or YYYY/MM/DD or HH:MM:SS
e.g. "LOG 12:00:00 13:00:00"
e.g. "LOG 2006/01/20 12:00:00 2006/01/21 12:00:00"
The file name for the downloaded log has the format
what part of the log to download.
LOG with no parameters will download since last.
“LOG ALL” gets whole log.
“LOG X” gets X last days ("LOG 3" gets last 3 days worth of data)
“LOG timeStart” gets data since provided date
“LOG timeStart timeEnd” gets data between provided dates
time can be YYYY/MM/DD HH:MM:SS or YYYY/MM/DD or HH:MM:SS
e.g. "LOG 12:00:00 13:00:00"
e.g. "LOG 2006/01/20 12:00:00 2006/01/21 12:00:00"
The file name for the downloaded log has the format
Stationname_log_YYYYMMDD.csv where YYYYMMDD is the date of the first data in
the log file
the log file