Sutron Corporation RLR-0003-1 Manuel D’Utilisation
Bringing the Benefits of Real-Time Data Collection to the World
7
The radars that have a front panel that allow a user to setup the operating parameters, monitor performance
and perform tests via the front panel.
The radar is both a sensor and a logger, allowing for stand-alone and integrated applications. The log inside
radar is capable of holding more than 300 000 readings, and allows the recording of status and stage (stage)
data. The radar has an SDI-12 interface as well as RS232 so it can provide data to data loggers or
communications equipment.
All radars provide an RS232 port that supports a simple command line mode compatible with HyperTerminal
and other communications programs to display data from the log and perform some essential operating
functions. It is possible to connect the radar to a modem or radio.
and perform tests via the front panel.
The radar is both a sensor and a logger, allowing for stand-alone and integrated applications. The log inside
radar is capable of holding more than 300 000 readings, and allows the recording of status and stage (stage)
data. The radar has an SDI-12 interface as well as RS232 so it can provide data to data loggers or
communications equipment.
All radars provide an RS232 port that supports a simple command line mode compatible with HyperTerminal
and other communications programs to display data from the log and perform some essential operating
functions. It is possible to connect the radar to a modem or radio.
Features
Non-contact measurement of stage (water level).
Low power consumption (<1ma quiescent, <20ma measuring @ 12V) for long battery life.
High precision featuring 0.001 ft resolution a range of 60ft.
High accuracy 0.01ft 5- 20ft, 0.05% reading 20-60ft.
Powerful and configurable processing filters out waves (Averaging and DQAP)
Automatically saves data in permanent log
User-settable measurement, logging, and averaging
Built-in flash log for 300,000 readings safeguards your data even if power is lost
Stand-alone operation or operation with other loggers/communications via SDI-12 and RS232
Automatically computes discharge
Front panel allows full access to setup, status and data
Provides redundant data storage when connected to a logger