Accton Technology 2555WAG2 Manuel D’Utilisation

Command Line Interface

7-78

7

None

Interface Configuration (Wireless)

Every bridge (except the root bridge) in the wireless bridge network must 
specify the MAC address of the parent bridge that is linked to the root bridge, 
or the root bridge itself.

This command configures the MAC addresses of child bridge nodes.

bridge-link child <index> <mac-address>

- index - The link index number of the child node. (Range: 1 - 6)
- mac-address - The wireless MAC address of a child bridge unit. 

(12 hexadecimal digits in the form “xx-xx-xx-xx-xx-xx”).

None

Interface Configuration (Wireless)

• In root bridge mode, up to six child bridge links can be specified using link 

index numbers 1 to 6. 

• In bridge mode, up to five child links can be specified using link index 

numbers 2 to 6. Index number 1 is reserved for the parent link, which must 
be set using the bridge parent command.

This command sets the time for aging out dynamic entries in the WDS forwarding 
table.

Enterprise AP(if-wireless a)#bridge-link parent 00-08-2d-69-3a-51
Enterprise AP(if-wireless a)#

Enterprise AP(if-wireless a)#bridge-link child 2 00-08-3e-84-bc-6d
Enterprise AP(if-wireless a)#bridge-link child 3 00-08-3e-85-13-f2
Enterprise AP(if-wireless a)#bridge-link child 4 00-08-3e-84-79-31
Enterprise AP(if-wireless a)#