Accton Technology 2555WAG2 Manuel D’Utilisation
System Configuration
6-2
6
Advanced Configuration
The Advanced Configuration pages include the following options.
Table 6-2. Menu
Menu
Description
Page
System
Configures basic administrative and client access
Identification
Specifies the host name
TCP / IP Settings
Configures the IP address, subnet mask, gateway, and domain
name servers
RADIUS
Configures the RADIUS server for wireless client authentication
and accounting
SSH Settings
Configures Secure Shell management access
Authentication
Configures 802.1X client authentication, with an option for MAC
address authentication
Filter Control
Filters communications between wireless clients, access to the
management interface from wireless clients, and traffic matching
specific Ethernet protocol types
VLAN
Enables VLAN support and sets the management VLAN ID
WDS Settings
Configures bridge or repeater modes for each radio interface and
sets spanning tree parameters
AP Management
Configures access to management interfaces
Administration
Configures user name and password for management access;
upgrades software from local file, FTP or TFTP server; resets
configuration settings to factory defaults; and resets the access
point
System Log
Controls logging of error messages; sets the system clock via
SNTP server or manual configuration
Mesh Settings
Configures meshing functions.
SNMP
Configures SNMP settings
SNMP
Controls access to this access point from management stations
using SNMP, as well as the hosts that will receive trap messages
SNMP Trap Filters
Defines trap filters for SNMPv3 users
SNMP Targets
Specifies SNMPv3 users that will receive trap messages
Radio Interface A
Configures the IEEE 802.11a interface
Radio Settings
Configures common radio signal parameters and other settings for
each VAP interface
Security
Enables each virtual access point (VAP) interface, sets the Service
Set Identifier (SSID), and configures wireless security
Radio Interface G
Configures the IEEE 802.11g interface
Radio Settings
Configures common radio signal parameters and other settings for
each VAP interface