Accton Technology ACCWN3301G Manuel D’Utilisation
Wireless PC Card
10
14. If you install TCP/IP, be sure to set the appropriate Gateway, DNS Server, and
Domain for your network.
15. Click “File and Print Sharing...” to share files or printers.
16. If you install an IPX/SPX-compatible protocol, then you also need to install the Client
for NetWare Networks.
17. Click on the “Identification” tab in the Network dialog box, and specify your computer
name and network workgroup.
18. Restart your computer.
Driver Installation for Windows NT 4.0
1.
Insert the PC Card into a standard Type II or III PCMCIA slot in your device.
2.
From the desktop, select “Control Panel,” double-click “Network,” click “Adapters,”
and then click the “Add” button in the Network dialog box.
and then click the “Add” button in the Network dialog box.
3.
Windows NT will present a list of all its supported adapters. Click “Have Disk” to
continue.
continue.
4.
Windows NT will ask for the drive/path containing the WN3301G-P1 Windows NT
drivers. Insert the WN3301G-P1 Driver Disk into the CD drive, enter the drive letter of
your CD drive, type the location of the driver, and then click “OK.”
drivers. Insert the WN3301G-P1 Driver Disk into the CD drive, enter the drive letter of
your CD drive, type the location of the driver, and then click “OK.”
5.
Windows NT will attempt to locate the SYS and INF files in the specified path. If you
have entered the path name correctly, Windows NT should copy the appropriate
drivers to the Windows NT system. You need to acknowledge the selection by
clicking “OK.”
have entered the path name correctly, Windows NT should copy the appropriate
drivers to the Windows NT system. You need to acknowledge the selection by
clicking “OK.”