Accton Technology ACCWN3301G Manuel D’Utilisation

Wireless PC Card

If your computer cannot find the Wireless PC Card or the network driver does not install 
correctly, check the following:

• Make sure the adapter is securely seated in the PCMCIA slot. When you insert the 

wireless adapter into the device’s slot, a beep should be heard if the adapter is properly 
inserted. Check for any hardware problems, such as physical damage to the card’s 
connector. 

• Try the card in another PCMCIA slot. If this also fails, test your computer with another 

WN3301G-P1 wireless card that is known to operate correctly.

• When operating under Windows NT, make sure a PCMCIA card and socket services 

driver is installed in your computer. Also check for resource conflicts using the Windows 
NT Diagnostics utility.

• Make sure your computer is using the latest BIOS.
• If there are other network adapters in the computer, they may be causing conflict. 

Remove all other adapters from the computer and test the wireless adapter separately.

• Check for a defective computer or PCMCIA connection by trying the adapter in another 

computer that is known to operate correctly.

• If it still does not work, take out the wireless adapter. Delete CW10.sys from 

c:\windows\system. Then go to “Control Panel” and delete the adapter from your 
network configuration menu. Restart your PC and reinstall the card as described on 
page 5.

If the Link LED on the PC Card does not light, or if you cannot access any network 
resources from the computer, check the following:

• Make sure the correct software driver is installed for your operating system. If 

necessary, try reinstalling the driver.

• Make sure the computer and other network devices are receiving power.
• The Access Station you want to attach to may be defective. Try using another Access 

Station.

• If you cannot access a Windows or NetWare service on the network, check that you 

have enabled and configured the service correctly. If you cannot connect to a particular 
server, be sure that you have access rights and a valid ID and password.

• If you cannot access the Internet, be sure you have configured your system for TCP/IP.