Accton Technology SMC2552WG2 Manuel D’Utilisation
Command Line Interface
6-46
6
snmp-server engine-id
This command is used for SNMP v3. It is used to uniquely identify the access point
among all access points in the network. Use the no form to delete the engine ID.
among all access points in the network. Use the no form to delete the engine ID.
Syntax
snmp-server engine-id
<engine-id>
no
snmp-server engine-id
engine-id
- Enter engine-id in hexadecimal (5-32 characters).
Default Setting
Enabled
Command Mode
Global Configuration
Command Usage
• This command is used in conjunction with the
snmp-server user
command.
• Entering this command invalidates all engine IDs that have been previously
configured.
• If the engineID is deleted or changed, all SNMP users will be cleared. You
will need to reconfigure all existing users
Example
snmp-server user
This command configures the SNMP v3 users that are allowed to manage the
access point. Use the no form to delete an SNMP v3 user.
access point. Use the no form to delete an SNMP v3 user.
Syntax
snmp-server user <user-name
>
user-name
- A user-defined string for the SNMP user. (32 characters
maximum)
Default Setting
None
Command Mode
Global Configuration
Command Usage
• Up to 10 SNMPv3 users can be configured on the access point.
Enterprise AP(config)#snmp-server engine-id 1a:2b:3c:4d:00:ff
Enterprise AP(config)#
Enterprise AP(config)#