Accton Technology SMC2552WG2 Manuel D’Utilisation
Introduction
1-6
1
System Defaults
The following table lists some of the access point’s basic system defaults. To reset
the access point defaults, use the CLI command “reset configuration” from the Exec
level prompt.
the access point defaults, use the CLI command “reset configuration” from the Exec
level prompt.
Table 1-1. System Defaults
Feature
Parameter
Default
Identification
System Name
SMC
Administration
User Name
admin
Password
smcadmin
General
HTTP Server
Enabled
HTTP Server Port
80
HTTPS Server
Enabled
HTTPS Server Port
443
Web Redirect
Disabled
TCP/IP
DHCP
Enabled
IP Address
192.168.2.2
Subnet Mask
255.255.255.0
Default Gateway
0.0.0.0
Primary DNS IP
0.0.0.0
Secondary DNS IP
0.0.0.0
RADIUS (Primary and
Secondary)
IP Address
0.0.0.0
Port
1812
Key
DEFAULT
Timeout
5 seconds
Retransmit attempts
3
Accounting Port
0 (Disabled)
Interim Update Timeout
3600 seconds
SSH
Server Status
Enabled
Server Port
22
PPPoE
PPPoE Status
Disabled