Accton Technology WA6102ACC Manuel D’Utilisation
BETA DRAFT
Altitude 300-2 Getting Started Guide
9
Optional Plastic Cover
The plastic cover is used with either the Altitude 300-2i
™
or Altitude 300-2d
™
. Plastic covers are
optional and are ordered with the plastic cover kit. The cover is installed on the Altitude 300-2
™
after all
cable connections and antenna adjustments are made and after the unit is locked or secured. To install
the plastic cover place it directly over the box and line up the antenna slots in the cover with the
antenna tubes on the box. While gently pulling out on the sides of the case where the clips are, press the
cover firmly on to the box. The installer should hear and feel the cover snap into position.
the plastic cover place it directly over the box and line up the antenna slots in the cover with the
antenna tubes on the box. While gently pulling out on the sides of the case where the clips are, press the
cover firmly on to the box. The installer should hear and feel the cover snap into position.
Figure 11: Plastic Cover Installation
NOTE
The cover is designed to secure the Altitude 300-2
™
from casual tampering that can affect service to
the clients. With the case in place the unit can’t be unlocked, the Ethernet connection can't be
unplugged, the integrated antennas (Altitude 300-2i
unplugged, the integrated antennas (Altitude 300-2i
™
) can't be rotated and the external antenna
connections (Altitude 300-2d
™
) can't be undone.
To remove the plastic cover, gently pull the sides near the clips outwards while pulling the cover off the
box.
box.
Gently pull out on the
sides of the plastic cover
as it is installed on the
box
Mount the bracket, and connect the
padlock and any cables before installing
the plastic cover
1
2