Accton Technology WBR143GN Manuel D’Utilisation
WAN Setting
5-7
5
DHCP
DHCP (dynamic host control protocol) is set as default for the primary WAN
connection. To enable DHCP for the Backup WAN you must select 3G as the
primary WAN connection.
connection. To enable DHCP for the Backup WAN you must select 3G as the
primary WAN connection.
Figure 5-5. WAN Settings for DHCP (Router mode)
DHCP — Enables DHCP for the WAN port.
• DHCP MTU: Sets the maximum packet size that the WAN port may transmit. The
• DHCP MTU: Sets the maximum packet size that the WAN port may transmit. The
Maximum Transmission Unit (MTU) is expressed in bytes. (Default:1500 bytes)
• DHCP MRU: Sets the maximum packet size that the unit may receive from other
units on the network and sends a message to inform them of the set threshold.
Maximum Receive Unit (MRU) is expressed in bytes. (Default: 1500 bytes)
Maximum Receive Unit (MRU) is expressed in bytes. (Default: 1500 bytes)