Accton Technology WBR143GN Manuel D’Utilisation
System Configuration
5-64
5
Status Information
The Information pages display details on the current configuration and status of the
wireless AP/Router, including associated wireless stations and event log messages.
wireless AP/Router, including associated wireless stations and event log messages.
Note: The Status Information pages will display different statistics depending on the
mode selected, AP or Router. Please refer to “Installation” on page 2-1 for details.
System Information
The System Information page displays basic system information as well as
Management IP, WAN, LAN, WLAN and WDS settings. The displayed settings are
for status information only and are not configurable on this page. This information is
split into the four sections that follow.
Management IP, WAN, LAN, WLAN and WDS settings. The displayed settings are
for status information only and are not configurable on this page. This information is
split into the four sections that follow.
Click "Information", followed by “System Information" and scroll to the relevant
section.
section.
Figure 5-44. System Information - Basic Information
System — Displays the basic system information in both AP and Router modes:
• Device Mode – Displays the hardware setting determined by the switch on the
• Device Mode – Displays the hardware setting determined by the switch on the
base of the unit.
• Model Name – The device name and model number.
• Firmware Version – The version number of the current wireless AP/Router
• Firmware Version – The version number of the current wireless AP/Router
software.
• Host Name – The web address assigned as an alias for the wireless AP/Router,
enabling the device to be uniquely identified on the network.
• System Date – The current date and time set for the wireless AP/Router, in the
form year; month; day; hours; minutes; seconds.
• Up Time – Length of time the management agent has been up, specified in hours
and minutes.