Sysgration Ltd. AXM-507 Manuel D’Utilisation
AXM-507 Mouse User Manual
AXM-507 User’s Guide
1. Connecting with Computer:
Take out this mouse from the packing.Open
the afterbody of the mouse, take the receiver
out .Plug the Receiver into
the PC USB Port . Under
Win2000 or higher , wait for
the OS to detect the RF
device. Under Windows 98
or lower installation
Take out this mouse from the packing.Open
the afterbody of the mouse, take the receiver
out .Plug the Receiver into
the PC USB Port . Under
Win2000 or higher , wait for
the OS to detect the RF
device. Under Windows 98
or lower installation
of driver for the device is
necessary.
2. Inserting Batteries:
2. Inserting Batteries:
A. Push the battery cover compartment
backwards and open it .
B.
Insert 2 AAA batteries Into
compartment with correct orientation .
compartment with correct orientation .
C. Slide the battery cover into the
compartment and close the cover .
3. ID Link:
When Factory ID has been changed or
wish to be changed , link
ID as below :
ID as below :
A. Press the ID button on
the top of the receiver and
the led on it starts blinking .
the led on it starts blinking .
B. Press the ID button on
the bottom of the mouse . If
blinking of that led turns
faster , ID Link is OK .
blinking of that led turns
faster , ID Link is OK .
Warning ! ID linking should be completed
within 10 seconds or connection would be
failed.
within 10 seconds or connection would be
failed.
4. use of special buttons
Press the button on the bottom,
then you can change the houseing of the mouse
which you like.
which you like.