Sysgration Ltd. AXM-704 Manuel D’Utilisation

Page de 1
2.4G    wireless Mouse Users’ guide 
 
 
 
 
 
 
 
 
Installation 
1.    Plug the receiver into a USB port of your computer. 
2.    Insert battery into mouse.   
3.    Press the ID button on the top of the receiver,When the led is on ,it starts blinking . 
4.    Press the ID button on the bottom of the mouse . If blinking is successful,the led on 
the receiver gliters . 
5.    Click the mouse key to get connected with the receiver.   
Trouble Shooting 
1.    Check receiver connection; try to inserting receiver to another USB port on your 
computer. 
2.    IF there is no Connection between the mouse    and the Receiver.    Re-insert the   
Receiver. take out the battery from the    mouse    and reinstall it.     
Note: 
FCC statement: 
This equipment has been tested and found to comply with the limits for a Class B   
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to   
provide  reasonable  protection  against  harmful  interference  in  a  residential 
installation. 
This equipment generates, uses and can radiate radio frequency energy and if not   
installed  and  used  in  accordance  with  the  instructions,  may  cause  harmful 
interference to radio communications. However, there is no guarantee that   
interference will not occur in a particular installation. If this equipment does cause 
harmful interference to radio or television reception, which can be determined by   
turning the equipment off and on. The user is encouraged to try to correct    the 
interference by one of the following measures: 
Reorient or relocate the receiving antenna. 
Increase the separation between the equipment and receiver. 
Connect the equipment into an outlet on a circuit different from that to which the   
receiver is connected. 
Consult the dealer or an experienced radio/TV technician for help. 
To assure continued compliance, any changes or modifications not expressly approved   
by the party responsible for compliance could void the user’s authority to operate this   
equipment. (Example- use only shielded interface cables when connecting to computer 
or peripheral devices). 
This device complies with Part 15 of the FCC rules. Operation is subject to the following   
two conditions: 
(1) This device may not cause harmful interference, and 
(2)  This  device  must  accept  any  interference  received,  including  interference  that       
may cause undesired operation.   
Caution! 
The manufacturer is not responsible for any radio or TV interference caused by   
unauthorized modifications to this equipment. Such modifications could void the user 
authority to operate the equipment.