Sysgration Ltd. R17 Manuel D’Utilisation
Electro-Magnetic Compatibility
․ Allow a clearance of at least 50cm(19.7") from sources of high-frequency and
magnetic interference (TV, mobile telephone ,infrared devices, loudspeaker cabinets,
etc),in order to avoid malfunctions and loss of data .The distance between the transmitter
and the receiver should be greater than 50cm(19.7").
․ When connecting additional or other components ensure that Guidelines for
Electro-Magnetic Compatibility (EMC) are observed.
Battery Treatment
Batteries may contain combustible materials .Misuse may cause battery leakage, heat,
explosion or ignition; bring about damage to the device or personal injury.
Please strictly observe the following:
․KEEP CHILDREN AWAY from batteries.
If by any chance, the batteries are swallowed, consult a doctor immediately.
․DO NOT CHARGE batteries (except rechargeable batteries).
․DO NOT CHARGE batteries (except rechargeable batteries).
․DO NOT FORCIBLY DISCHARGE batteries.
․DO NOT SHORT-CIRCUIT batteries.
․Do not expose the batteries to high temperatures caused by sunshine, fire or the like!
․DO NOT ATTEMPT TO DISASSEMBLE or DEFORM batteries.
․DO NOT SHORT-CIRCUIT batteries.
․Do not expose the batteries to high temperatures caused by sunshine, fire or the like!
․DO NOT ATTEMPT TO DISASSEMBLE or DEFORM batteries.
This may lead to injury, or the liquid of the battery may get into your eyes or adhere to
your skin .If this happens, rinse with a large quantity of water immediately and consult a
medical doctor.
․DO NOT allow batteries to be exposed to heavy impact by dropping or throwing the
batteries.
․DO NOT reverse the positive (+) and negative (-) terminals. This will help avoid
short-circuits.
․DO NOT MIX used and new or different types of batteries together.
Your equipment may not operate properly. In addition, the battery exhausted first may
be excessively drained (over-discharged).
․REMOVE PROMPTLY the used batteries from the device.
․REPLACE ALL BATTERIES with new batteries of the same type at the same time.
․INSULATE THE TERMINAL part with tape or the like at the time of storage or
․REPLACE ALL BATTERIES with new batteries of the same type at the same time.
․INSULATE THE TERMINAL part with tape or the like at the time of storage or
disposal of the batteries.