The Whistler Group SC01 Manuel D’Utilisation
16
Searching for Frequencies
During a tune search, the
scanner tunes up or down
starting from a frequency you
specify.
scanner tunes up or down
starting from a frequency you
specify.
1. Press TUNE. The display
alternates between PSE and
–t–.
–t–.
2. If you want to change the
starting frequency, enter a
new frequency and press
ENT.
new frequency and press
ENT.
3. Press PSE to start tune search. –t– appears on the
display.
4. To change the tuning direction, press or .
Service Bank Search
Your scanner contains groups of preset frequencies
called Service Banks. You can search for marine, fire/
police, aircraft, ham, and weather transmissions even if
you do not know the specific frequencies that are used in
your area.
Then you can store the frequencies you find into the
scanner’s channels (except for weather and marine
banks, which are already stored as channels). To start the
search, press the button for the Service Bank you would
like to search (Marine, Fire/Police, Air, Ham, or Weather).
called Service Banks. You can search for marine, fire/
police, aircraft, ham, and weather transmissions even if
you do not know the specific frequencies that are used in
your area.
Then you can store the frequencies you find into the
scanner’s channels (except for weather and marine
banks, which are already stored as channels). To start the
search, press the button for the Service Bank you would
like to search (Marine, Fire/Police, Air, Ham, or Weather).
1
3
2
2
Search Commands
• Press
PSE to pause searching. Press PSE again to
resume.
• Press
•/Delay to turn the two-second delay
feature on and off.
• Press
L/O to lock-out a frequency (except
Weather band).
• To reverse the search direction at any time, press
or .
• If necessary, you can select search groups using
the number keys.