The Whistler Group SC01 Manuel D’Utilisation
20
Locking Out Channels
You can increase the scanning or search speed by locking
out channels or frequencies that have a continuous
transmission, such as control channels, weather
channels, or birdie frequencies.
out channels or frequencies that have a continuous
transmission, such as control channels, weather
channels, or birdie frequencies.
Press
L/O when the scanner stops on a channel or frequency
while scanning or searching. The scanner locks out the
channel/frequency and continues scanning/searching.
channel/frequency and continues scanning/searching.
To manually lock-out a channel, select the channel then
press
press
L/O.
L/0
appears in the display.
• Your scanner automatically locks out empty channels.
• You can still manually select locked-out channels.
• You can lock-out a maximum of 50 frequencies during
• You can still manually select locked-out channels.
• You can lock-out a maximum of 50 frequencies during
a search. If you try to lock-out more, L-O Fr-FULL
appears.
appears.
Managing Lock-outs
1. Set the scanner to manual by pressing SCAN/MAN
until MAN appears
2. Hold down L/O
/
L/O RV W for about two seconds.
The scanner pulls up a locked out channel.
3. Press and hold L/O
/
L/O RV W to show the next
locked out channel. If an error beep sounds, there are
no locked out channels.
no locked out channels.
4. To remove the lock-out, press L/O
/
L/O RV W until
L/0
disappears.
Managing Service Bank Lock-outs
1. Hold down L/O
/
L/O RV W for about two seconds
during a Service Bank search.
2. Press or repeatedly to scroll through the list
of locked-out frequencies. L-r and
L/0
appear in the
display.
3. Press L/O
/
L/O RV W to remove the lock-out. The list
scrolls to the next locked-out frequency.
• When you reach the highest locked-out frequency, the
scanner beeps twice and rolls to the lowest locked-out
frequency.
frequency.
• If the Service Bank has no locked-out frequencies,
EMPty
appears.