The Whistler Group SC01 Manuel D’Utilisation
25
Additional Information
Care
Your scanner is not waterproof. Do not expose it to rain,
moisture, or extremely high humidity. If the scanner gets
wet, wipe it dry immediately. Use and store the scanner
only in normal temperature environments. Handle the
scanner carefully; do not drop it. Keep the scanner
away from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
moisture, or extremely high humidity. If the scanner gets
wet, wipe it dry immediately. Use and store the scanner
only in normal temperature environments. Handle the
scanner carefully; do not drop it. Keep the scanner
away from dust and dirt, and wipe it with a damp cloth
occasionally to keep it looking new.
Initializing the Scanner
If the scanner’s display locks up or does not work properly
after you connect a power source, you might need to
initialize the scanner.
after you connect a power source, you might need to
initialize the scanner.
Important: This procedure clears all information you
stored in the scanner’s memory. Only initialize the
scanner when you are sure the scanner is not working
properly.
stored in the scanner’s memory. Only initialize the
scanner when you are sure the scanner is not working
properly.
Important: Do not turn off the scanner until the
initialization is complete. When the initialization is
complete, 1CH 000.000
initialization is complete. When the initialization is
complete, 1CH 000.000
0
appears on the display.
1. Turn off the scanner, then turn it on again. WELCOME
SCAnnInG rECEIVEr
appears.
2. Press 0, then press 1 while the welcome message
is on the screen. InItIAL appears for about two
seconds, then YES
seconds, then YES
— Ent and No — CLEAr appear
alternately.
3. Press ENT. WAIt appears for about two seconds.
Service and Repair
If your scanner is not performing as it should, take it to
your local RadioShack store for assistance. To locate
your nearest RadioShack, use the store locator feature
at www.radioshack.com, or call 1-800-843-7422 and
follow the menu options. Modifying or tampering with the
scanner’s internal components can cause a malfunction and
might invalidate its warranty and void your FCC authorization
to operate it.
your local RadioShack store for assistance. To locate
your nearest RadioShack, use the store locator feature
at www.radioshack.com, or call 1-800-843-7422 and
follow the menu options. Modifying or tampering with the
scanner’s internal components can cause a malfunction and
might invalidate its warranty and void your FCC authorization
to operate it.